Artpox 750gr Ultra Transparent Epoxy Resin And Hardener

Product Features *Transparent epoxy resin for small volume applications. You can use it to make objects such as necklaces, bracelets, rings, earrings, bookends. *Packed as a set of 750 grams as components A and B. There are 500 grams of resin and 250 grams of hardener in the set. In correct use, the resin and hardener are packed just enough to fit together. There is not much product left after use. * It has a transparent appearance. You need to use epoxy pigment to color it. Using any colorant other than epoxy pigment may cause negative results. * It is odorless. After curing, the product is completely odorless. * It is shiny. In correct use, it will have a smooth surface. *Does not contain solvents. * Does not contain volatile substances. ?* It has a working time of 50-70 minutes. How to Use *The product is prepared in two components, resin and hardener, and the components should be used by mixing them. *Resin and hardener mixing ratio should be 2 units of resin and 1 unit of hardener by weight. A precision scale must be used for the best adjustment of the mixing ratio. Proportions made with a measuring cup, beaker or injector may be incorrect. *For a better mixture, first add the hardener to the mixing bowl and then add the resin on it, then mix at a slow speed for at least 2 minutes until a homogeneous and smooth image is obtained. *After the first mixture is made, transfer the product to another clean container and mix again for at least 1 minute. *Preferably after vacuuming the prepared mixture, pour it into the mold to be applied. * Take care to pour slowly and from a single point in order to prevent the formation of bubbles and air bubbles. *Scan the product surface quickly with hot air and/or torch to remove the bubbles formed on the surface after casting. *The cast product can be removed from the mold at the end of the demoulding period. While the product is completing this process, the system should be kept in the range of 18 C-35 C degrees. Considerations * The product is two-component and should not be used without mixing the components. * Do not use outside the specified application thickness range. Low thickness may cause delayed drying and high thickness may cause burning/yellowing problem. * Never heat the product during mixing and application. * To obtain a completely foam-free result, use a vacuum machine. * Use precision scales to measure. * For whatever reason, do not mix any other materials that do not fit the system into the product. * Make sure that the equipment you use during the application is dry and clean. * Try to work at a constant ambient temperature as much as possible. * After making sure that the poured product has completely hardened, remove it from the mold. * Do not forget to use work safety equipment. * Avoid contact with your skin. * Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight. * Do not keep the products open. * Do not leave the products obtained as a result of the mixture under direct sunlight. All of the information is given as a suggestion to get the best results from the application. It is entirely the user's responsibility that the product is not used in accordance with its intended purpose. Maximum 5 pieces of this product can be ordered. swordslife reserves the right to cancel orders over 5 units. More than 10 stocks are offered to be sold at the campaign price. The seller determines the selling price of the product you have reviewed. A product can be sold by more than one seller. Sellers of products offered for sale by more than one seller are listed according to the price they set for the product, seller ratings, delivery status, promotions on the products, whether the cargo is free or not, whether the products can be delivered with fast delivery, and the stock and categories of the products.